Description

Medium-Capacity Tail Lift for Trucks and Trailers – Up to 2000kg Lift Capacity

The GE-LM.20 is an extremely versatile medium-capacity tail lift, suitable for commercial trucks above 7.5T GVW, trailers, and semi-trailers.

This powerful 4-cylinder lift is available with reinforced steel platforms or lightweight aluminium platforms up to 2250 mm. Longer platforms are available in combination with lift type GE-LM.30.

Special applications are available: lifts for truck-trailer combinations with draw-bar (GE-LV), adaptations for trailer-coupling mounted between the chassis beams (arm LMK), for very short overhang (GE-LMP), and for tipper vehicles (GE-KA).

A best-seller in the medium-duty capacity range.
Powerful, stable 4-cylinder tail lift for 1500-2000 kg lift capacity.
Maximum platform depth 2000 mm.
Wedged platform. Level ride with an automatic tilt at ground level. Adjustable platform orientation.
A very versatile lift is available with a large choice of value-adding options and extra equipment.
Lift frame in hot-dip zinc plated or “galvanized” finish. Best possible protection against corrosion [OAT104].

Characteristics:

PLATFORM

Light-weight aluminium platform, or heavy-duty steel platform
Aluminium platform with profiles oriented in a longitudinal direction [type V…], and a cross-milled anti-slip protection pattern
Synthetic rollers for the contact between the platform and the ground
Maximum platform depth: 2450 mm. (Longer platforms possible on GE-LM.30)

FUNCTIONAL & MECHANICAL CHARACTERISTICS

Conical/wedge platform. Level ride with an automatic tilt at ground level
Platform tilt adjustable at any position from the exterior controls

HYDRAULIC CHARACTERISTICS

2 lift cylinders for maximum platform stability
2 tilt cylinders with spring-assisted platform opening
Electrical safety valves on all cylinders
Manual emergency operation on all electro valves
Cylinder piston rods in hard-chromed stainless steel
Cylinders equipped with rubber gaiters and lubrication
Pump unit 12V or 24V DC, accessible on 5 sides for easy maintenance

ELECTRICAL CHARACTERISTICS

Control box with battery disconnect switch, joystick control and change-over switch [OAE030.BT.0]
Without battery disconnect switch: dual toggle-switch control box supplied loose [OAE048.0]
Electrical controls without sensitive electronic components in basic configuration
Safe exterior controls with compulsory 2-hand operation
Electric motor with thermal cut-out fuse

FITTING

Bolt-on mounting plates for quick and easy fitting [OAM010]
Fixed 3-piece bumper bar available as an option [OAF100.ST]

FINISH & MAINTENANCE

Low-maintenance bearings in all articulation points, plus grease nipples
Lift frame in hot-dip zinc plated or “galvanised” finish. Best possible protection against corrosion [OAT104].
Alu platform or platform sections in natural finish
Steel platforms to 2000 mm shotblasted and KTL epoxy primed, or in zinc primer at the discretion of Gilani Engineering. Steel platforms > 2000 mm in zinc primer.